BT-410 Dongle

[902-0131-000] BT-410 Dongle     ■ Caution - Install the driver on your PC to use the BT-410 Dongle (Please refer to the e-Manual)   ■ Features -BT-410 dongle converts two interfaces: USB 2.0 interface and Bluetooth 4.0 Low...

CM-100A

This controller is used in OLLO and can connect other products such as the geared motor box, servo motor, touch sensor, LED module, IR Sensor, etc. Create a task code for control using RoboPlus Task and use it to control the movements. The...

CM-150

[902-0103-000] CM-150     ■ Description   -  The CM-150 controller is used with ROBOTIS DREAM, and various DREAM parts   (geared motor, servo motor, touch sensor, LED module, IR sensor, etc.) can be connected to it...

DYNAMIXEL Shield

OpenCR1.0

 [903-0257-000] OpenCR1.0     ■ Basic Features OpenCR1.0 (Open-source Control module for ROS) is an open source robot controller embedded with a powerful MCU from the ARM Cortex-M7 line-up. The hardware, software, schematics, PCB Gerber,...

U2D2

 [903-0000-000] U2D2      ■ Basic Features U2D2 is a small size USB communication converter that enables to control and to operate the DYNAMIXEL with the PC. It is smaller than the previous model and has mount holes to make...

U2D2 PHB Set

U2D2 Power Hub Board

3P Extension PCB

BT-210

BT-410

[902-0110-000] BT-410   Customers can NOT use the BT-410 to connect to the PC.Please use the BT-210 to connect your robot with a PC.  Update: The BT-410 can connect to the PC with the BT-410 Dongle, or the USB Downloader LN-101.   BT-410...

CM-5

The CM-5 is intended for the Bioloids (exception : See Below) and can be connected with the Bioloid Frames and Dynamixels to create a robot. CM-5 support TTL communication and control AX series Dynamixels. PACKAGE CONTENTS   Description ...

CM-530

CM-700

IR Receiver IR-10

  IR Receiver OIR-10       ■ DESCRIPTION   - This receiver is intended for the remote controller, RC-100.   - This receiver is included in the basic RC-100 set, but is being sold separately in case...

OpenCM 485 Expansion Board

OpenCM9.04 - Connectors and Accessory Set

OpenCM9.04-A (no connectors onboard)

OpenCM9.04-C (with onboard XL-type connectors)

RC-100B

Serial Cable BSC-10

USB Downloader LN-101_INT

This is the same product as 902-0041-000 USB Downloader LN-101. The SKU# and name have been changed.  USB Downloader LN-101 The LN-101(USB Downloader) is used to download programs from the PC onto the CM-100. The LN-101 is also used to connect the...

ZIG-100 Set

The ZIG-100 is a small PAN (personal area network) module embedded with a MCU and Zigbee IC, which uses the 2.4GHz frequency bandwidth to communicate to the UART. The ZIG-100 is sold as a set of two with the default IDs pre-set. Please note pins have...

ZIG2Serial

**This product has been discontinued. This product will no longer be available once the current stock has been depleted.**   The ZIG2Serial is a wireless device that communicates with the ZIG-100 or BT110 via RS232 signals. When using the PC to...