LIPO Battery Charger LBC-010
- This charger is intended for use with the Li-Po battery.
- The SMPS 12V 5A is required for charging through this unit.
- Support 2S and 3S Cell charge. (Exception, does not charge simultaneously)
- LIPO Battery Charger LBC-010 x 1 pc
* Battery and SMPS 12V 5A sold separately.
2S Cell : 8.4V
3S Cell : 12.6V
RED LED : Charging
BLINKING RED LED : Bad Battery Connection
- Do not apply heat, water or any other liquid on the battery.
- Do not take the battery apart.
- Do not use damaged batteries that are inflated, deformed, damaged, etc.
- Do not charge 2S and 3S cells together at once.
- When charging, make sure the battery is connected with the correct polarities.
- Do not charge when the battery is hot. Please charge after it has cooled off.
- Do not charge the battery when it is being used by the controller.
- When the battery is not being used or is fully charged, please do not have it connected to a device to avoid complete discharge or damage
- LIPO 11.1V Battery Set LBS-010