DYNAMIXEL MX-28T

$219.90
(No reviews yet) Write a Review
SKU:
902-0067-000
UPC:
8809052930752
Condition:
New
Weight:
0.40 LBS
Shipping:
Calculated at Checkout

Out of stock

[902-0067-000] DYNAMIXEL MX-28T

 

**Caution - Recommended voltage of MX-28 is different than that of the former RX-28.

- MX-28T supports TTL communication. (MX-28 has changed to MX-28T)

- Operating Voltage : 10~14.8V (Recommended Voltage 12V)

 

DESCRIPTION:

DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module. MX series is a new concept of DYNAMIXEL with advanced functions like precise control, PID control, 360 degree of position control and high speed communication.

 
ROBOTIS recommends you to purchase the new and improved type of DYNAMIXELs with the aluminum front case.
(MX-28AT, MX-28AR, MX-64AT, MX-64AR)
 
Some strong points of using aluminum type case are:
1) Precisely designed and specially processed Aluminum front case
2) Decreased noise and improved protection against heat
3) Front screw threads are already threaded for easy bolt assembly
4) Maintains same dimensions as the existing DYNAMIXEL M-series (option frames are compatible)

 

CHARACTERISTICS:

  • Advanced durability, degree of precision, and wider control zone were achieved thanks to newly applied CONTACTLESS ABSOLUTE ENCODER
  • 360 degrees POSITION CONTROL without dead zone
  • 4,096 PRECISE RESOLUTION by 0.088 degrees
  • SPEED CONTROL at ENDLESS TURN MODE
  • Reliability and accuracy were advanced in the position control through PID CONTROL
  • High baud rate up to 4.5Mbps
  • TTL LEVEL COMMUNICATION

 

PACKAGE CONTENTS

Description Qty
DYNAMIXEL MX-28T 1
HORN RX28 HN07-N101 1
WASHER Thrust Washer 1
CABLE 3P Cable 200mm 1
BOLT/NUT Wrench Bolt M2.5*6 16pcs
Wrench Bolt M2.5*8 1
Wrench Bolt M2*3 10pcs
Nut M2.5 18pcs

             

 

 

 

 

 

 

 

 

HARDWARE SPECIFICATIONS 

DESCRIPTION SPECIFICATION
Weight 72g
Dimension 35.6mm x 50.6mm x 35.5mm
Gear Ratio 193 : 1
Operation Voltage (V) 10 12 14.8
Stall Torque (N.m) 2.3 2.5 3.1
Stall Current (A) 1.3 1.4 1.7
No Load Speed (RPM) 50 55 67
Motor Maxon Motor
Minimum Control Angle About 0.088 degrees x 4,096
Operating Range Actuator Mode : 360 degrees Wheel Mode : Endless turn
Operating Voltage 10~14.8V (Recommended voltage : 12V)
Operating Temperature -5°C ~ 80°C
Command Signal Digital Packet
Protocol Half duplex Asynchronous Serial Communication (8 bit, 1 stop, No Parity)
Link (physical) TTL Multi Drop Bus (daisy chain type connector)
ID 254 ID (0~253)
Baud Rate 8000bps ~ 4.5Mbps
Feedback Functions Position, Temperature, Load, Input Voltage, etc.
Material Case : Engineering Plastic Gear : Full Metal
Position Sensor Contactless Absolute Encoder by AMS
Default ID #1 - 57600bps

** After purchase, please change ID and baud rate according to your use.

 

■ Hyperlinks

Frame, Horn, Bearing Compatible Chart : Click Here

Controller Compatibility Chart : Click Here

Download Drawing : Click Here

Dynamixel SDK : Click Here

OpenCM IDE : Click Here

Software RoboPlus (R+) : Click Here

Link to e-Manual : Click Here