DYNAMIXEL AX-12A

$44.90
(No reviews yet) Write a Review
SKU:
902-0003-001
UPC:
8809052930196
Condition:
New
Weight:
0.20 LBS
Shipping:
Calculated at Checkout

The DYNAMIXEL AX-12A is a new version of the AX-12+ with the same performance, but with a more advanced external design. It is 100% compatible with the AX-12+ on a 1:1 scale, with the same control method.

 

PACKAGE CONTENTS

Description Qty
DYNAMIXEL AX-12A 1
HORN B01-HORN 1/assembled
FRAME FP04-F2 1
FP04-F3 1
BPF-WA/BU Set 1
CABLE 3P Cable 200mm 1
BOLT/NUT Bolt PHS M2*6 16pcs
Bolt PHS M3*10 1
N1 NUT M2 16pcs

 

HARDWARE SPECIFICATIONS

Description Specification
Weight 54.6g
Dimension 32mm x 50mm x 40mm
Gear Ratio 254 : 1
Operation Voltage (V) 12
Stall Torque (N.m) 1.5 (12V)
Stall Current (A) 1.5
No Load Speed (RPM) 59 (12V)
Motor Cored Motor
Minimum Control Angle about 0.29 degrees x 1,024
Operating Range Actuator Mode : 300 degrees Wheel Mode : Endless turn
Operating Voltage 9~12V (Recommended voltage : 11.1V)
Max. Current 900mA
Standby Current 50mA
Operating Temperature -5°C ~ 70°C
Command Signal Digital Packet
Protocol Half duplex Asynchronous Serial Communication (8bit,1stop,No Parity)
Link (physical) TTL Level Multi Drop (daisy chain type Connector)
ID 254 ID (0~253)
Baud Rate 7843bps ~ 1 Mbps
Feedback Functions Position, Temperature, Load, Input Voltage, etc.
Material Case : Engineering Plastic Gear : Engineering Plastic
Position Sensor Potentiometer
Default Setting ID #1 (1 Mbps)

** WARNING **
The gear design was changed to improve durability. Therefore, the AX-12A Gear Set (SKU No. 902-0087-001) will not be compatible with the former AX-12+ Gear Set (SKU No. 903-0087-000).

 

■ Hyperlinks

Frame, Horn, Bearing Compatible Chart : Click Here

Controller Compatibility Chart : Click Here

Download Drawing : Click Here

Dynamixel SDK : Click Here

OpenCM IDE : Click Here

Software RoboPlus (R+) : Click Here

Link to e-Manual : Click Here