This is the same product as 902-0032-000 USB2Dynamixel.
The SKU# and name have been changed temporarily.
- The USB2Dynamixel connects to the USB port on a computer and has both a 3 pin and 4 pin port to connect Dynamixels.
- The USB2Dynamixel can be used with controllers such as CM-5 and CM-2+ that use serial communication or can be used to wirelessly control a robot by connecting the Zig2Serial to the USB port.
- A Switch to select between RS-232, RS-485, TTL
- 3P Connector: Communication port for TTL level(For AX and MX series control)
- 4P Connector: Communication port RS-485(For DX, RX, EX, and MX series control)
- Dynamixel : AX-Series, DX-Series, RX-Series, EX-106+, MX-Series
The USB2Dynamixel driver is automatically installed with RoboPlus software.
(Download Roboplus: http://www.robotis.com/xe/download_en)