**LBB-040 Battery Charger Set will be discontinued and replaced by LBB-041 Battery Charger Set.**
Li-ion Battery Charger Set LBB-040
- This charger is intended for the ROBOTIS Li-ion Battery 3.7V 1300mAh LB-040 rechargeable battery.
- Uses OLLO rivets to install onto robots.
- Can be used as a frame to attach the battery onto robots.
- Charging : RED LED, Charging complete : LED OFF
- Uses the 2P robot cables for battery boxes to connect to the controller (robot).
- Li-ion Battery charger Set LBB-040 x 1 pc
- USB Micro B Cable x 1 pc
- Robot Cable-2P for Battery Box (100mm) x 1 pc
- Do not use damaged batteries (inflated, deformed, damaged, etc.).
- Do not charge when the battery is hot. Please charge after it has cooled off.
- Do not charge the battery (LB-040) when connected to the controller.
Do not keep the battery connected to the controller when not in use.
When storing away the battery for a long time, make sure the battery life is around 50%.
- Do not store it in wet or hot places.
- Rechargeable Battery : Li-ion Battery 3.7V 1300mAh LB-040
1 Review Hide Reviews Show Reviews
Just got this battery charger w/connector to CM9.04 board - works fine, allows me to mess with more than one Dynamixel servo at a time on the base board.
I find Robotis products to be well designed and well made - I appreciate the quality and know what I buy will work in my equipment.
Korean made = good design; good quality.