[903-0220-001] Li-ion Battery 3.7V 1300mAh LB-041
For the ROBOTIS MINI, please purchase LI-ION BATTERY 3.7V 1300MAH LB-040.
- Lithium-ion rechargeable battery.
- PCM is incorporated to protect the battery from overcharge, discharge, and excessive current.
- Battery cover (blue) included for safety.
※ LB-040 (Old Li-ion battery) can be recharged with LBB-041 (New Li-ion battery charger).
※ HOWEVER, both parts MUST be vertically placed then inserted. DO NOT OBLIQUELY INSERT.
Li-ion Battery 3.7V 1300mAh LB-041
* Battery charger (LBB-041) sold separately
■ H/W Specifications
24mm x 70mm x 27mm
Cell type Li-ion 18650
PCM built-in (overcharge, discharge, excessive current protection)
**WARNING: Do NOT charge the battery while the battery is connected to the robot**
- Do not drop or give impact.
- Do not operate while charging.
- Do not apply heat, water or any other liquid on the battery.
- Do not place in the microwave, washing machine or dryer.
- Do not use damaged batteries (inflated, deformed, damaged, etc.).
- Do not short circuit the polarity.
- Do not take the battery apart.
- When charging, make sure the battery is connected into the correct polarity.
- Do not charge when the battery is hot. Please charge after it has cooled off.
- Do not keep the battery connected to the controller when not in use.
■ Storage Precautions
- Detach the battery from the robot or controller when storing away.
- When storing away the battery for a long time, make sure the battery life is around 50%.
- Do not store it in wet or hot places.
※ Li-ion Battery 3.7V 1300mAh LB-040 has a warranty period of 6 months.
■ Compatible Products
- Controller : CM-150, OpenCM9.04
- Battery Charger : Li-ion Battery Charger Set LBB-040, Li-ion Battery Charger Set LBB-041
-This battery can NOT be connected directly to the controller. You will need the Li-ion Battery Charger Set (LBB-041) to connect to the controller (robot).